Skip to main content
中文

Products

↑ ↓ move↵ openEsc close

Carbon-carbon composites (CFC)
Carbon-carbon composites (CFC)

Carbon-carbon composites (CFC)

High-density C/C sheets, boards and machined parts: strong, light and stable at high temperature.

Bulk density
1.5–1.65g/cm³
Flexural strength⊥
180–200MPa
Heat resistance
≤2800°C
Used in
PV crystal growth, heat treatment, SiC furnaces

Applications

Used in PV monocrystalline furnaces, high-temperature heat treatment, powder metallurgy, and semiconductor SiC synthesis and crystal growth furnaces. Supplied as bendable sheets (0.6–1.5 mm), boards from 2 to 100 mm, curved panels and long-fibre panels, or machined into protection, heating, fastening and support parts such as heaters, bolts, material racks and HJT/TOPCon carrier boards.

Key features

  • Good heat resistance
  • Good stability
  • High strength
  • Excellent resistivity distribution
  • Low density compared with high-temperature metals
  • Low thermal conductivity

Microstructure

  • Surface and microstructure of C/C composite, SEM
    Surface and microstructure of C/C composite, SEM
    Surface and microstructure of C/C composite, SEM

Technical data

Typical values from our product data. Grades and sizes can be made to your requirements.

PropertyUnit
Bulk densityg/cm³1.51.65
Flexural strength⊥MPa180200
Flexural modulus⊥GPa4548
Tensile strength∥MPa120145
Compressive strengthMPa150150
Interlaminar shear strengthMPa1820
Thermal expansion coefficient∥ (1300 °C)10⁻⁶/K0.96–1.10.96–1.1
Thermal expansion coefficient⊥ (1300 °C)10⁻⁶/K1012
Thermal conductivity⊥ (25 °C)W/(m·K)1313.1
Thermal conductivity⊥ (1000 °C)W/(m·K)1313.3
Thermal conductivity⊥ (1700 °C)W/(m·K)1212
Thermal conductivity∥W/(m·K)—36
Specific heat capacityJ/(kg·K)740810
Processing temperature°C20002000
Heat resistance°C≤2800≤2800
Initial oxidation temperature°C350350
Resistivity20 °CμΩ·m2821
Shore hardness7678
Porosity%1815
Initial ash contentppm300300
Purified ash contentppm5–205–20
Surface roughnessµmRa 2.1Ra 2.1
Dimensionsmm2800 × 1600 × 0.6–902800 × 1600 × 0.6–90

Contact

Send us a drawing

Tell us what the part does and attach whatever you have: a full drawing, a sketch, or photos of the part you use today.

  1. We review the drawing and operating conditions.
  2. We reply by email with a recommended grade and a price.
  3. We confirm the specification and production plan with you before manufacturing.
Shenzhen · Precision machining
C1801, Block BC, Huizhi R&D Center, Longteng Community, Xixiang, Bao’an District, Shenzhen, China+86 755 2756 5656 ext. 8800
Foshan · Manufacturing base
No. 843 Pingshan Avenue, Yanghe Town, Gaoming District, Foshan, Guangdong, China+86 757 8880 0168
Yunnan
LONGi Industrial Park, Nanhaizi, Qujing, Yunnan, China
Xi'an
Xi'an, Shaanxi, China

The partStep 1 of 3